BIPEL 150 ton Hydraulic Press
Max table size left to right between gibs 711 mm
Max table size front to back 590 mm
Standard heated platen size (5.9 kVA per pair) 508 mm
Daylight between tables 976 mm
Daylight between heated platens (using stool bar) 593 mm
Main Ram stroke 457 mm
Hydraulic circuit pressure 1000 psi
Max pressing force 150 ton
Main ram pull back force at circuit pressure 6.5 ton
BIPEL 150 tonne Factory rebuilt
BIPEL 150 tonne Factory rebuilt
This factory rebuilt BIPEL 150 tonne hydraulic press
Daylight between heating platens 593 mm
Main ram stroke 457 mm
20″ x 20″ induction heating platens
Bottom Ejector
Transfer cylinder
Omron PLC and HMI
Proportional pressure control
CE Mark
BIPEL 150 tonne Factory rebuilt (Copy)
BIPEL 300 tonne Factory rebuilt
This factory rebuilt BIPEL 300 tonne hydraulic press
Daylight between heating platens 841 mm
Main ram stroke 610 mm
30″ x 30″ induction heating platens
Bottom Ejector Optional
Omron PLC and HMI
Proportional pressure control
Guards to be agreed with buyer
CE Mark
BIPEL 30 ton laboratory hydraulic press
NEW – BIPEL 30 ton laboratory hydraulic press for composite material
Platen size: 400 mm x 400 mm
Day light between heated platen 350 mm
Stroke: 350 mm
Number of heated platens: 2
Temperature: 400°C
Cooling: water and air
BIPEL 40 to hydraulic press (Twin)
Max table size left to right between gibs 393 mm
Max table size front to back 393 mm
Standard heated platen size (5.9 kVA per pair) 355 mm
Daylight between tables 559 mm
Daylight between heated platens 353 mm
Main Ram stroke 355 mm
Hydraulic circuit pressure 1000 psi
Max pressing force 40 ton
Main ram pull back force at circuit pressure 2 ton
BIPEL 400 ton hydraulic press
Max table size left to right between gibs 774 mm
Max table size front to back 889 mm
Standard heated platen size (5.9 kVA per pair) 762 mm
Daylight between tables 1206 mm
Daylight between heated platens (using stool bar) 841 mm
Main Ram stroke 610 mm
Hydraulic circuit pressure 1000 psi
Max pressing force 400 ton
Main ram pull back force at circuit pressure 16.5 ton
BIPEL 50 ton laboratory hydraulic press
NEW – BIPEL 50 ton laboratory hydraulic press for composite material
Platen size: 600 mm x 600 mm
Day light between heated platen 350 mm
Stroke: 350 mm
Number of heated platens: 2
Options:
Temperature: 400°C
Cooling: water and air
BIPEL 70 Tonne Pelleter (NEW)
BIPEL 70 ton Pelleter (NEW)
Main Ram Pressing Force (max) 70 tonne
Main Ram pressing Force (min) 7 tonne
Main Ram Stroke (max) 70 mm
Maximum full Length 76 mm
Minimum full length 25 mm
Motor 15kW
Electric supply to be agreed
Typical number of pellets per hour 720
Diameter of single pellet 50mm – 110mm
Diameter of double pellet 76.2mm
Dimension: H2020mm x W1700mm x D1050mm
Weight 2.25 tonnes
Farrel Bridge 12” Dump Extruder
Farrel Bridge 12” Dump Extruder, with David Brown Gear Box, Induction Motor and cooling bath.
Cold Feed
175 H.P
Heating and cooling
Hydraulic locking

TMC 50 tonne Up-stroking press
Press capacity 50 tons
Daylight 400 mm
Stroke 400 mm
Platen size 400 mm x 400 mm